Generate SNRM request.
Return ValueSNRM request as byte array.
Remarks
This method is used to generate send SNRMRequest.
Before request can be generate at least following properties must be set:
Note! According to IEC 62056-47 when communicating using TCP/IP SNRM request is not send.
Before request can be generate at least following properties must be set:
- ClientID
- ServerID
Note! According to IEC 62056-47 when communicating using TCP/IP SNRM request is not send.
See AlsoAssembly: Gurux.DLMS2 (Module: Gurux.DLMS2) Version: 5.2.0.1